Inpainting in ComfyUI: A Quick Guide

Inpainting in ComfyUI has not been as easy and intuitive as in AUTOMATIC1111. The resources for inpainting workflow are scarce and riddled with errors. This post hopes to bridge the gap by providing the following bare-bone inpainting examples with detailed instructions in ComfyUI.

  • Inpainting with a standard Stable Diffusion model
  • Inpainting with an inpainting model
  • ControlNet inpainting
  • Automatic inpainting to fix faces

Software

Read the ComfyUI installation guide and ComfyUI beginner’s guide if you are new to ComfyUI.

Using the workflow file

You will find many workflow JSON files in this tutorial. Drop them to ComfyUI to use them. Do the following steps if it doesn’t work.

Every time you try to run a new workflow, you may need to do some or all of the following steps.

  1. Install ComfyUI Manager
  2. Install missing nodes
  3. Update everything

Install ComfyUI Manager

Install ComfyUI manager if you haven’t done so already. It provides an easy way to update ComfyUI and install missing nodes.

To install this custom node, go to the custom nodes folder in the PowerShell (Windows) or Terminal (Mac) App:

cd ComfyUI/custom_nodes

Install ComfyUI by cloning the repository under the custom_nodes folder.

git clone https://github.com/ltdrdata/ComfyUI-Manager

Restart ComfyUI completely. You should see a new Manager button appearing on the menu.

If you don’t see the Manager button, check the terminal for error messages. One common issue is GIT not installed. Installing it and repeat the steps should resolve the issue.

Install missing custom nodes

To install the custom nodes that are used by the workflow but you don’t have:

  1. Click Manager in the Menu.
  2. Click Install Missing custom Nodes.
  3. Restart ComfyUI completely.

Update everything

You can use ComfyUI manager to update custom nodes and ComfyUI itself.

  1. Click Manager in the Menu.
  2. Click Updates All. It may take a while to be done.
  3. Restart the ComfyUI and refresh the ComfyUI page.

Inpainting with a standard model

This workflow is for inpainting with a standard Stable Diffusion model (not an inpainting model). This workflow is similar to inpainting the whole picture in AUTOMATIC1111.

Download the ComfyUI workflow for inpainting below.

comfyui inpaint standard model workflow

This inpainting workflow works for both Stable Diffusion v1.5 and Stable Diffusion XL models.

This workflow only works with a standard Stable Diffusion model, not an Inpainting model. (See the next section for a workflow using the inpaint model)

How it works

The trick is NOT to use the VAE Encode (Inpaint) node (which is meant to be used with an inpainting model), but:

  1. Encode the pixel images with the VAE Encode node.
  2. Use the Set Latent Noise Mask to attach the inpaint mask to the latent sample.

The KSampler node will apply the mask to the latent image during sampling.

How to use

Step 1: Load a checkpoint model

This workflow uses the Realistic Vision v5.1 model. (A SD v1.5 fine-tuned model).

Download the Realistic Vision model, put it in the folder ComfyUI > models > checkpoints.

Refresh the page and select the model in the Load Checkpoint node’s dropdown menu.

Step 2: Upload an image

Pick an image that you want to inpaint.

Andy Lau is ready for inpainting.

You can download the image in PNG format here.

Upload it to the workflow.

Step 3: Create an inpaint mask

Right-click the image. Select Open in MaskEditor in the context menu.

Mask the area you want to regenerate.

Click Save to node.

Step 4: Adjust parameters

Select a Checkpoint model. Note that an inpainting model doesn’t work with the workflow.

Change the prompt:

a man wearing sunglasses, epic style, super hero, highly detailed

The original denoising strength (denoise) is too high. Set it to 0.6.

Step 5: Generate inpainting

Finally, press the Queue Prompt to perform inpainting.

Note

You can adjust the denoising strength in the KSampler node. Lower it to change less. Increase it to change more. Setting it too high will result in incoherent images.

This workflow is for use with a low to moderate denoising strength. If you must use a high denoising strength, you need to use the next two workflows: Inpaint with an inpainting model and ControlNet inpainting.

Inpaint with an inpainting model

An inpainting model is specially designed for inpainting. Its model architecture is different from a standard model. You cannot use the workflow in the previous section with an inpainting model.

Download the ComfyUI inpaint workflow with an inpainting model below.

comfyui inpaint with inpainting model workflow

How it works

This workflow uses the VAE Enocde (for inpainting) node to attach the inpaint mask to the latent image.

Note that this workflow only works when the denoising strength is set to 1. Don’t change it to any other value!

How to use

The usage is the same as the first method, so I won’t repeat it here.

You will need to use an inpainting model, such as the Realistic Vision Inpainting model.

ControlNet inpainting

The two workflows above have their own drawbacks: You cannot use a high denoising strength with a standard model, and a low denoising strength with an inpainting model.

ControlNet inpainting allows you to use a standard Stable Diffusion model with a high denoising strength.

You can download the ComfyUI workflow for ControlNet inpainting below.

comfyui controlnet inpainting workflow

How it works

You make the workflow just like any other ControlNets. But you use the Inpaint Preprocessor node. It takes the pixel image and the inpaint mask as the input, and output to the Apply ControlNet node.

The ControlNet conditioning is applied through positive conditioning as usual.

How to use

Download the Realistic Vision model. Put it in Comfyui > models > checkpoints folder. Refresh the page and select the Realistic model in the Load Checkpoint node.

Download the ControlNet inpaint model. Put it in ComfyUI > models > controlnet folder. Refresh the page and select the inpaint model in the Load ControlNet Model node.

You can use it like the first example.

You can set the denoising strength to a high value without sacrificing global coherence.

Automatic inpainting to fix faces

Adetailer is an AUTOMATIC1111 extension for inpainting faces automatically. In Stable Diffusion, faces are often garbled if they are too small. Adetailer crops out a face, inpaints it at a higher resolution, and puts it back.

You can do the same with the FaceDetailer node with the Impact Pack in ComfyUI.

Text-to-image with Face Detailer

Download the ComfyUI Detailer text-to-image workflow below.

comfyui face detailer workflow

How it works

The main node that does the heavy lifting is the FaceDetailer node. It uses a face-detection model (Yolo) to detect the face. It then crops it out, inpaints it at a higher resolution, and puts it back.

Compare the original image on the left and the face-fixed image on the right below.

How to use

You need to set the checkpoint model in the Load Checkpoint node. Adjust the prompt as needed. Press Queue Prompt.

it works the same as the Adetailer’s default setting.

You can adjust the denoising strength in the FaceDetailer node to adjust how much the face should change.

Face Detailer on an uploaded image

The following workflow automatically fixes faces on an uploaded image.

To use the workflow, upload an image to the Load Image node and press Queue Prompt.

You can optionally revise the prompt to customize the face.

Related Posts